User manual

Released 06/2010
E-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone]; Fax: [phone]
DECO 2000
1-13
C MACHINE CONTROLS
4. TOP STITCH AND BOTTOM STITCH LENGTH ADJUSTMENT
1. To change the length of the Top stitch and Bottom stitch press the Edit button on the main screen.
2. The screen for setting the parameters appears on the display.
To change the size of the Top stitch, press the top stitch value on the screen Ê.
3. The numerical display appears on the screen. The range of stitch length parameters
is from 0 to 63. Set the required parameter for the Top stitch.
Press Enter Î to confirm set parameter and move back to previous screen.
Use the same method to set the parameters of the Bottom stitch Ë. Parameters selected in this
numerical screen must not exceed a maximum value of 63 units, with one unit equal to 0.1 mm.
Press Clear Í to keep previous set parameter. The previous display with the original parameter
appears on the screen.
4. When all required parameters are set, press the OK button Ì to move to the main screen.
UP
SPEED 310
-
+
READY
STANDARD STITCH
EDIT
500
150
<<
>>
STYLE
EDIT
STANDARD STITCH
OK
t
20
STANDARD STITCH
ENT
t
CRL
10
2 3
6
4 5
7 8 9