User manual

Released 06/2010
E-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone]; Fax: [phone]
DECO 2000
1-11
C MACHINE CONTROLS
1. POWER UP
1.1.Connect the machine to the power supply of appropriate voltage 230 V.
To start the machine turn the main switch Ę to position 1.
1.2.The display Í is activated and lit up.
Information about AMF REECE and the program version recorded in the machine temporarily
appears on the screen.
OK
R
1.3.This screen is automatically changed to the fault screen Î. This screen informs the operator of any
machine faults. Release the black STOP button Ì and press the green START button
ËË
ËË
Ë and this
screen will disappear.
1.4.The main menu appears on the screen.
The machine is ready to sew or adjustments to the parameters to be made.
CAUTION !
The faults will be also displayed, if the drum cover (part no. 41831082) is open. Close the drum
cover and press the OK button on the screen - see chapter Troubleshooting.