User manual

Released 06/2010
E-mail: [e-mail]; [e-mail]; website: www.amfreece.com
Phone: [phone]; Fax: [phone]
DECO 2000
1-10
B - MACHINE ASSEMBLY
3. ACCESSORIES
A package of accessories is supplied with this machine, please refer to page 3-52 for detailed
descriptions.
4. CONNECTION OF THE MACHINE TO THE POWER SUPPLY
Power supply must be 208 to 230 volts 1 phase, 50 or 60 hertz. Receptacle plug must meet
requirements of IEC standard 364-4-41, its circuit breaker must be minimal 10A with characteristic
C according to the EN 60947-2 (or 16A with characteristic B). No other devices must not be
connected to the circuit breaker of the socker.
The machine is equipped with a filters which contain capacitors which generate an high
frequencyleakage current. In order to prevent nuisance tripping, residual current protection
device must be protected against these high frequency currents: this is the case for industrial
residual current device (example „S“ type).