Specifications

82-70 Pinspotter Products
Features and Benefits
Microprocessor Efficient: State-of-the-Art Technology simplifies
the circuit
Reduced Power Consumption: Modern PC-Board components
require less power
Reset/Program Zero: Enables zeroing the memory of the chassis
Scoring Interface: Compatible with all Major brands of scoring
Short Cycle Capable: Allows for some Automatic Scoring units to
communicate on a strike that the table does not go down to feel
for pins
Pindication Capable: Has the circuitry necessary to drive the pin-
lights for the masking units that have a pindication feature
Ease of Installation: All connections made with quick disconnect
terminals
Option Jumper’s
Instruct: Enables automatic cycle out of Instruct-O-Mat when
switching to first ball
Foul: Enables disabling of the foul communication to the machine:
without disabling the foul light at the approach
2
1
CTI by ZOT
5 to 1 Board Conversion
#827001............$369.80
with Pindication Diagnostics (includes #827006)
Enhanced single board conversion for Original
AMF 5-board Chassis
Same features as the AMF XOP/98-70 board
Master Controller Interface Port (see page 7)
Note:
Master Controller interface compatible. (See page 7)
Optional Add-on Short Run Cycle -
Communications Cable
#827006.................$49.60
Adding the CTI by ZOT Sweep Reverse Communications Cable to the
5 to 1 board Conversion will provide all AMF & Brunswick V ector
automatic scoring features, including: Short Strike Cycle, Short Cycle
7 to 10-pin Pick, or Short Cycle Miss (Gutter ball) and automatic
sweep reverse on offspot.
Compatible with all brands of automatic scoring, including
Brunswick Vector, but not including FrameWorx, AS90, AS80, ASK
and all other Brunswick systems.
Now Includes
#827006 Cable
“Lowest Price in the Industry”
Unlike some other manufacturers, ZOT includes a
scoring interface in its single PC Board 5-to-1 Board
Conversion. Other manufacturers’ products require
two boards (at a higher cost) to accomplish the
same thing.