Specifications

5
Electronic
Triggering
Call ZOT at 1-800-525-8116 for more details
Electronic Triggering
27
ZOT Unit Replaces two
Brunswick #57-214904-000
ET 2001 Add-on Scoring Option
For Centers with AMF Pinspotters and Brunswick Scoring
If you’re dissatisfied with your present AS80 and AS90 Series Ball Detect
System, the ZOT ET 2001’s ability to double as an improvement
to your automatic scoring system makes it the most cost
effective ball detect system available.
The following are the wire harness options necessary to
activate the automatic scoring ball detect feature:
#400159 for Brunswick AS 79 Scanner ..............................$64.50
#440080 for Brunswick AS 86 Scanner ..............................$52.80
#400194 for Brunswick AS 90 Camera & FrameWorx .....$64.50
ZOT Unit Replaces 79
Scanner Ball Detect
Sweep Lock-Out
(Micro-Switch and harness)
#400216
................$21.55
ZOT’s Sweep Lock-out resolves intermittent
multiple cycling (e.g., Sweep Reversal), which
can occur when the sensors are mounted in
the sweep path sensor mounting zone.
Guard
Position
Gray Block
Blue Block
Sensor
mounting
zone
Note:
The above wire harness options are only compatible to
ZOT ET 2001.
ET 2000 & ET 2001 Spare Parts 115V & 230V:
Description Part Number
Spare Parts Kit #400138
PC Board #432052
Blue Emitter Block #400001
Flat Gray Emitter Block #450005
Gray Receiver Block #400133
Transformer for 115V #290005
Transformer for 220V #290006
Sensor Shims #400121
Sensor Lens Kit #400032
Call ZOT for pricing
Optional
Add-on
Product for
ET 2001
Optional
Add-on
Product for
ET 2001
Features and Benefits:
(continued)
Remote Trigger Ports: ZOT’s
ET 2001
can be triggered by external sources,
e.g., scoring system remote switch.
Control Box Protection: ZOT’s Dual
Lane Control Box mounts on the back
of the masking unit curtain wall; out
of the way of potential damage by
balls or pins.
Flip Top Cover: The Control Box Cover
hinges from the top, which means no
screwdriver is needed to view the P.C.
Board. Simply flip the cover up for
inspection, and down again when fin-
ished.
Simple Installation: ZOT’s ET 2001 installs
in three easy steps:
1. Wall transformer plugs into 115
Volt outlet for power supply.
2. Two conductor outputs for each
pinspotter simply quick-splice to
the bowlers reset button wires.
The AMF trigger switch can
either be retained…or disman-
tled.
3. The Infrared Emitter and
Receiver are simply plugged in,
leveled and secured at each
lane.
All Modular Design: All components
plug into the P.C. Board separately,
making it possible and easy to change
parts, and troubleshoot.
Rake/Sweep Path Sensor Mounting:
The Sensors can be mounted behind
the Sweep (in the Sweep path), with
addition of option #400216. See upper
right.