Specifications

New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 71
Installing this Software Version
Caution: Software version 5.4.4-1.1 requires a release license for the SBx908 and
SBx8100 switches. If you are using either of these switches, ensure that your switch
has a 5.4.4 release license certificate before you upgrade. Contact your authorized
Allied Telesis support center to obtain a license. For details, see “Licensing this
Software Version on an SBx908 Switch” on page 67 and “Licensing this Software
Version on a Control Card for an SBx8100 Series Switch” on page 69.
To install and enable this software version, use the following steps:
1. Copy the software version file (.rel) onto your TFTP server.
2. If necessary, delete or move files to create space in the switch’s Flash memory for the
new file. To see the memory usage, use the command:
awplus# show file systems
To list files, use the command:
awplus# dir
To delete files, use the command:
awplus# del <filename>
You cannot delete the current boot file.
3. Copy the new release from your TFTP server onto the switch.
awplus# copy tftp flash
Follow the onscreen prompts to specify the server and file.
4. Move from Privileged Exec mode to Global Configuration mode, using:
awplus# configure terminal
Then set the switch to reboot with the new software version:
Switch Command
x210 Series
awplus(config)# boot system x210-5.4.4-1.1.rel
x230 Series
awplus(config)# boot system x230-5.4.4-1.1.rel
x310 Series
awplus(config)# boot system x310-5.4.4-1.1.rel
IX5-28GPX
awplus(config)# boot system IX5-5.4.4-1.1.rel
x510 Series
awplus (config)# boot system x510-5.4.4-1.1.rel
x610 Series
awplus(config)# boot system x610-5.4.4-1.1.rel
x900 Series
awplus(config)# boot system x900-5.4.4-1.1.rel
SBx908
awplus(config)# boot system SBx908-5.4.4-1.1.rel
SBx8100 with CFC400
awplus(config)# boot system SBx81CFC400-5.4.4-1.1.rel
SBx8100 with CFC960
awplus(config)# boot system SBx81CFC960-5.4.4-1.1.rel