Specifications

64 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
type issu New NNNNNNNNNYTrigger
Commands
This new command
configures a trigger that will
activate if the automatic
phase of the ISSU process
enters one of the following
selectable states: upgraded,
completed, or aborted.
exception
coredump size
Deleted YNNYYYYYYYLogging
Commands
This command has been
deprecated in 5.4.4 release
and deleted in 5.4.4-1.1
release. There are no
alternative commands.
show card Modified NNNNNNNNYYSystem
Configuration
and
Monitoring
Commands
When running this
command while ISSU is
actively rebooting CFCs, an
asterisk is now appended to
the line card’s state on the
output. This indicates that
the card is not running the
same software version as the
chassis’ active CFC. An
explanation line is also
added at the end of the
output.
show card detail Modified NNNNNNNNYYSystem
Configuration
and
Monitoring
Commands
This command now provides
software version
information.
show system Modified NNNNNNNNYYSystem
Configuration
and
Monitoring
Commands
This command now displays
a warning message when
ISSU is in progress.
type issu New NNNNNNNNNYTrigger
Commands
This command configures a
trigger to that will activate at
a selected point in the ISSU
process.
Table 4: New and modified commands in 5.4.4-1.1
Command Status
x210 x230 x310 IX5 x510 x610 x900 SBx908 SBx8100 CFC400 SBx8100 CFC960
Software
Reference
Chapter
Description