Specifications

New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 63
show atmf links
statistics
Modified NNNNNYNYYYAMF
Commands
In addition to its original
function, this command is
now also able to display the
AMF link configuration and
packet exchange statistics
for a specified interface.
show atmf
provision nodes
New NNNNNYNYYYAMF
Commands
This command is available
on master nodes only and
provides the user with
details of a provisioned node
created in the backup media.
clear test cable-
diagnostics tdr
New NNNNYNNNNNCable Fault
Locator
Commands
This command clears the
results of a cable-diagnostics
CFL test.
show test cable-
diagnostics tdr
New NNNNYNNNNNCable Fault
Locator
Commands
This command displays the
results of a cable-diagnostics
CFL test.
test cable-
diagnostics tdr
interface
New NNNNYNNNNNCable Fault
Locator
Commands
This command initiates
cable-diagnostics tests to
twisted pair data cables in
order to detect either
correct, short, or open circuit
terminations.
show boot Modified NNNNNNNNNYFile
Management
Commands
This command now provides
ISSU version status
information.
show version Modified NNNNNNNNNYFile
Management
Commands
The show output now
displays a message
whenever ISSU is running.
issu abort-timeout New NNNNNNNNNYISSU
Commands
This command initiates an
abort timeout to apply when
running an ISSU.
issu boot New NNNNNNNNNYISSU
Commands
This command initiates an
ISSU.
issu rejoin-timeout New NNNNNNNNNYISSU
Commands
This command configures
the ISSU CFC rejoin timeout
that will be applied to each
CFC.
show issu New NNNNNNNNNYISSU
Commands
This command shows the
ISSU configuration and its
process status.
Table 4: New and modified commands in 5.4.4-1.1
Command Status
x210 x230 x310 IX5 x510 x610 x900 SBx908 SBx8100 CFC400 SBx8100 CFC960
Software
Reference
Chapter
Description