Specifications

60 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
Changes in this Version
Table 4 on page 60 lists all new and modified commands in this version and shows which
chapter of the Software References has details of each command.
Table 5 on page 65 lists new and modified features in this version.
Table 6 on page 66 lists new and modified SNMP (Simple Network Management
Protocol) MIBs (Management Information Bases) in this version.
If your existing configurations include commands modified or deprecated in this version
(see the Status column in the following tables), check whether you need to modify these
configurations. For full command descriptions, modes and examples, see the appropriate
Software Reference for your switch.
Table 4: New and modified commands in 5.4.4-1.1
Command Status
x210 x230 x310 IX5 x510 x610 x900 SBx908 SBx8100 CFC400 SBx8100 CFC960
Software
Reference
Chapter
Description
atmf backup delete New NNNNNYNYYYAMF
Commands
This command removes a
backup file from external
media.
atmf backup server New NNNNNYNYYYAMF
Commands
This command is available
on master nodes only and
configures remote file
servers as the destination for
AMF backups.
atmf backup stop New NNNNNYNYYYAMF
Commands
This command is available
on master nodes only and
stops a backup that is
currently running the master
node you are logged onto.
atmf backup
synchronize
New NNNNNYNYYYAMF
Commands
This command is available
on master nodes only and
initiates a system backup of
files from your master node’s
active remote file server to
its backup remote file server.
atmf cleanup New YYYYYYYYYYAMF
Commands
This command erases data
from nvs and flash, then
reboots to put the device
into a clean state ready to be
used as a replacement node
on a provisioned port.