Specifications

Authentication Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 45
auth-web-server ssl
This command enables HTTPS protocol or both HTTP protocol and HTTPS protocol for the
web authentication server feature.
When both protocols are enabled, HTTP packet is redirected to HTTP server and HTTPS
packet is redirected to HTTPS server respectively.
Use the no variant of this command to disable HTTPS protocol.
Syntax auth-web-server ssl [hybrid]
no auth-web-server ssl
Default
HTTP protocol is enabled by default.
Mode Global Configuration
Examples To enable HTTPS functionality for the web authentication server feature, use the following
commands:
To enable both HTTP protocol and HTTPS protocol, use the following commands:
To disable HTTPS functionality for the web authentication server feature, use the following
commands:
Validation
Commands
show auth-web
show auth-web-server
Parameter Description
hybrid
Enable both HTTP protocol and HTTPS protocol
awplus#
configure terminal
awplus(config)#
auth-web-server ssl
awplus#
configure terminal
awplus(config)#
auth-web-server hybrid
awplus#
configure terminal
awplus(config)#
no auth-web-server ssl