Specifications

Authentication Commands
38 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
auth-web-server host-name
This command assigns a hostname to the web authentication server.
Use the no variant of this command to remove the hostname from the web authentication
server.
Syntax auth-web-server host-name <hostname>
no auth-web-server host-name
Default
The web authentication server has no hostname.
Mode Global Configuration
Usage When the web authentication server uses HTTPS protocol, the web browser will validate
the certificate. If the certificate is invalid, the web page gives a warning message before
displaying server content. However, the web page will not give warning message if the
server has a hostname same as the one stored in the installed certificate.
Examples To set the auth.example.com as the hostname of the web authentication server, use the
commands:
To remove hostname auth.example.com from the web authentication server, use the
commands:
Related Commands aaa authentication auth-web
auth-web enable
Parameter Description
<hostname>
URL string of the hostname
awplus#
configure terminal
awplus(config)#
auth-web-server host-name auth.example.com
awplus#
configure terminal
awplus(config)#
no auth-web-server host-name