Specifications

New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 285
ip name-server
Modified
NNN
P
1
P
1
P
1
Y IP Addressing
and Protocol
Commands
This command adds IPv4 or IPv6 DNS
server addresses. This command has
been modified to provide VRF Lite
capability, allowing a specific VRF Lite
instance.
show ip dns
forwarding
cache
Modified
NNN
P
1
P
1
P
1
Y IP Addressing
and Protocol
Commands
This command displays the DNS Relay
name resolver cache. This command
has been modified to provide VRF Lite
capability, allowing a specific VRF Lite
instance or the global VRF Lite
instance.
show ip dns
forwarding
server
Modified
NNN
P
1
P
1
P
1
Y IP Addressing
and Protocol
Commands
This command has been modified to
provide VRF Lite capability.
show ip name-
server
Modified
NNN
P
1
P
1
P
1
Y IP Addressing
and Protocol
Commands
This command displays a list of IPv4
and IPv6 DNS server addresses that
your switch will send DNS requests to.
This command has been modified to
provide VRF Lite capability allowing a
specific VRF Lite instance, or the
global VRF Lite instance.
(ipv6 access-list
named ICMP
filter)
New
NY YYPPP IPv6 Hardware
Access Control
List (ACL)
Commands
This ACL filter adds a filter entry for an
IPv6 source and destination address
and prefix, with ICMP (Internet
Control Message Protocol) packets, to
the current named IPv6 access-list.
(ipv6 access-list
named protocol
filter)
New
NY YYPPP IPv6 Hardware
Access Control
List (ACL)
Commands
This ACL filter adds a filter entry for an
IPv6 source and destination address
and prefix, with an IP protocol type
specified, to the current named IPv6
access-list.
(ipv6 access-list
named TCP UDP
filter)
New
NY YYPPP IPv6 Hardware
Access Control
List (ACL)
Commands
This ACL filter adds a filter entry for an
IPv6 source and destination address
and prefix, with TCP (Transmission
Control Protocol) or UDP (User
Datagram Protocol) source and
destination ports specified, to the
current named IPv6 access-list.
commit (IPv6)
New
NY YYPPP IPv6 Hardware
Access Control
List (ACL)
Commands
This command commits the IPv6 ACL
filter configuration entered at the
console to the hardware immediately
without exiting the IPv6 Hardware
ACL Configuration mode.
Table 7: New and modified commands in 5.4.4(cont.)
Command Status
x210 IX5 x510 x610 x900 SBx908 SBx8100
Software
Reference
Chapter
Description