Specifications

278 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
clear ip bgp
flap-statistics
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
The unicast and multicast parameter
options have been removed in this
release.
clear ip bgp
peer-group
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
The unicast and multicast parameter
options have been removed in this
release.
exit-address-
family
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now exits either the
IPv6 or the IPv4 Address Family
Configuration command mode.
neighbor
activate
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now enables the
exchange of BGP IPv4 and BGP4+ IPv6
routes with a BGP or BGP4+
neighboring router, and also within
an IPv4 or an IPv6 specific address-
family.
neighbor
advertisement-
interval
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now sets up the
minimum interval between sending
the BGP or BGP4+ routing updates.
neighbor
allowas-in
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now accepts am AS-
path with the specified Autonomous
System (AS) number from inbound
updates for both BGP and BGP4+
routes.
neighbor as-
origination-
interval
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now enables the
sending of AS (Autonomous System)
origination routing updates to the
specified BGP or BGP4+ neighbor.
neighbor
attribute-
unchanged
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now advertises
unchanged BGP or BGP4+ attributes
to the specified BGP or BGP4+
neighbor.
neighbor
capability
graceful-restart
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now configures the
device to advertise the Graceful
Restart Capability to BGP and BGP4+
neighbors.
neighbor
capability orf
prefix-list
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now advertises the
OSF (Outbound Route Filters)
capability to BGP and BGP4+
neighbors.
neighbor
capability route-
refresh
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now advertises the
route-refresh capability to the
specified BGP and BGP4+ neighbors.
Table 7: New and modified commands in 5.4.4(cont.)
Command Status
x210 IX5 x510 x610 x900 SBx908 SBx8100
Software
Reference
Chapter
Description