Specifications

276 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
auth-web-server
intercept-port
New
YY
P
1
P
1
YYY Authentication
Commands
This command registers any
additional TCP port numbers that the
web authentication server is to
intercept.
copy proxy-
autoconfig-file
New
YY
P
1
P
1
YYY Authentication
Commands
This command downloads the proxy
auto configuration (PAC) file to your
switch.
erase proxy-
autoconfig-file
New
YY
P
1
P
1
YYY Authentication
Commands
This command removes the proxy
auto configuration file.
show auth two-
step supplicant
brief
New
YY
P
1
P
1
YYY Authentication
Commands
This command displays the
supplicant state of the two-step
authentication feature on the
interface.
show auth-web
Modified
YY
P
1
P
1
YYY Authentication
Commands
This command displays the
authentication information for Web-
based authentication. It now includes
output for the new command auth
two-step enable.
show auth-web-
server
Modified
YY
P
1
P
1
YYY Authentication
Commands
This command has new output
showing the web authentication
server configuration and status on the
switch.
show proxy-
autoconfig-file
New
YY
P
1
P
1
YYY Authentication
Commands
This command displays the contents
of the proxy autoconfig (PAC) file.
address-family
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command now enters the IPv6
Address Family Configuration
command mode with the new ipv6
parameter, in addition to the IPv4
Address Family Configuration mode
with the existing ipv4 parameter. In
this mode you can configure address-
family specific parameters.
aggregate-
address
Modified
NNN
P
1
P
1
P
1
P
1
BGP and BGP4+
Commands
This command has been modified for
BGP4+ to optionally use an IPv6 prefix
and length to add an aggregate route
that can be advertised to BGP4+
neighbors. This command creates an
aggregate entry in the BGP4+ routing
table if the switch learns, by any
means, any routes that are within the
range configured by the aggregate
address/mask.
Table 7: New and modified commands in 5.4.4(cont.)
Command Status
x210 IX5 x510 x610 x900 SBx908 SBx8100
Software
Reference
Chapter
Description