Specifications

AMF Commands
252 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
switchport atmf-link
This command enables you to configure a port or aggregator to be an AMF uplink/
downlink. Running this command will automatically place the port or aggregator into
trunk mode.
Use the no variant of this command to remove any AMF-link that may exist for the
selected port or aggregated link.
Syntax switchport atmf-link
no switchport atmf-link
Mode Interface Configuration
Example To make a switchport 1.0.1 an AMF crosslink, use the following commands
Node_1#
configure terminal
Node_1(config)#
interface port1.2.1
Node_1(config-if)#
switchport atmf-link