Specifications

AMF Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 251
Example 2B To make static aggregator sa1 an AMF crosslink, use the following commands for good
practice:
In this example VLAN 2 is assigned to the static aggregator, and the native VLAN (VLAN 1)
is explicitly excluded from the aggregated ports and the crosslink assigned to it.
Related Commands show atmf links statistics
Node_1#
configure terminal
Node_1(config)#
interface sa1
Node_1(config-if)#
switchport atmf-crosslink
Node_1(config-if)#
switchport trunk allowed vlan add 2
Node_1(config-if)#
switchport trunk native vlan none
Note
The AMF management and domain VLANs are automatically added to the
aggregator and the crosslink.