Specifications

AMF Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 243
show atmf provision nodes
This command displays information about each provisioned node with details about date
and time of creation, boot and configuration files available in the backup, and license files
present in the provisioned backup. This includes nodes that have joined the network but
are yet to run their first backup.
This command can only be run on amf master nodes.
Syntax show atmf provision nodes
Mode Privileged Exec
Usage This command is only available on master nodes in the AMF network. The command will
only work if provisioned nodes have already been set up. Otherwise, an error message is
shown when the command is run.
Example To show the details of all the provisioned nodes in the backup use the command:
Figure 20: Sample output from the show atmf provision nodes command
Related commands atmf provision node create
atmf provision node clone
atmf provision node configure boot config
atmf provision node configure boot system
show atmf backup
NodeName#
show atmf provision nodes
switch1#show atmf provision nodes
ATMF Provisioned Node Information:
Backup Media .............: SD (Total 3827.0MB, Free 3481.1MB)
Node Name : switch2
Date & Time : 06-May-2014 & 23:25:44
Provision Path : card:/atmf/provision_nodes
Boot configuration :
Current boot image : x510-1766_atmf_backup.rel (file exists)
Backup boot image : x510-main-20140113-2.rel (file exists)
Default boot config : flash:/default.cfg (file exists)
Current boot config : flash:/abc.cfg (file exists)
Backup boot config : flash:/xyz.cfg (file exists)
Software Licenses :
Repository file : ./.configs/.sw_v2.lic
: ./.configs/.swfeature.lic
Certificate file : card:/atmf/nodes/awplus1/flash/.atmf-lic-cert