Specifications

AMF Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 237
show atmf links statistics
This command displays details of the AMF links configured on the device and also displays
statistics about the AMF packet exchanges between the devices.
It is also possible to display the AMF link configuration and packet exchange statistics for a
specified interface.
This command can only be run on amf master nodes
Syntax show atmf links statistics [interface [<port_number>]]
Mode
User Exec
Example 1 To display AMF link statistics for the whole switch, use the command:
Parameter Description
interface Specifies that the command applies to a specific interface
(port) or range of ports. Where both the interface and port
number are unspecified, full statistics (not just those relating to
ports) will be displayed.
<port_number> Enter the port number for which statistics are required. A port
range or a static channel can also be specified.
Where no port number is specified, statistics will be displayed
for all ports on the switch.
switch1#
show atmf links statistics