Specifications

AMF Commands
228 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
show atmf group members
This command will display all group memberships within an AMF working-set. Each node
in the AMF working set is automatically added to automatic groups which are defined by
hardware architecture, e.g. x510, x610. Nodes that are configured as masters are
automatically assigned to the master group. User can define arbitrary groupings of AMF
members based on their own criteria, which can be used to select groups of nodes.
Syntax show atmf group members [user-defined|automatic]
Mode Privileged Exec
Example To display group membership of all nodes in a working-set, use the command:
Related Commands show atmf group
show atmf
atmf group (membership)
Parameter Description
user-defined User defined group membership display.
automatic Automatic group membership display.
ATMF_NETWORK[9]#
show atmf group members
Figure 13: Sample output from the show atmf group members command
ATMF Group membership
Automatic Total
Groups Members Members
----------------------------------------------------------------
master 1 Building_1
poe 1 HW_Team1
x510 3 SW_Team1 SW_Team2 SW_Team3
x900 1 Bld1_Floor_2
x610 1 HW_Team1
x8100 2 Building_1 Building_2
ATMF Group membership
User-defined Total
Groups Members Members
----------------------------------------------------------------
marketing 1 Bld1_Floor_1
software 3 SW_Team1 SW_Team2 SW_Team3
Table 5: Parameter definitions from the show atmf group members command
Parameter Definition
Automatic Groups Lists the Automatic Groups and their nodal composition.
The sample output shows AMF nodes based on same
Hardware type or belonging to same Master group.
User-defined Groups Shows grouping of AMF nodes in user defined groups.
Total Members Shows the total number of members in each group.
Members Shows the list of AMF Nodes in each group.