Specifications

AMF Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 223
Example 2 To display the AMF backup information with the optional parameter server-status,
use the command:
Related Commands show atmf
atmf network-name
Node_1#
show atmf backup server-status
Node1#sh atmf backup server-status
Id Last Check State
-------------------------------------
1 186 s File server ready
2 1 s SSH no route to host
Table 2: Parameter definitions from the show atmf backup server-status command
Parameter Definition
Scheduled Backup Indicates whether AMF backup scheduling is enabled or disabled.
Schedule Displays the configured backup schedule.
Next Backup Time Displays the date and time of the next scheduled.
Backup Media The current backup medium in use. This will be one of USB, SD, or NONE. Note that the USB will
take precedence over the SD card. Utilized and available memory (MB) will be indicated if
backup media memory is present.
Current Action The task that the AMF backup mechanism is currently performing. This will be a combination
of either (Idle, Starting, Doing, Stopping), or (manual, scheduled).
Started The date and time that the currently executing task was initiated in the format DD MMM YYYY.
Current Node The name of the node that is currently being backed up.
Node Name The name of the node that is storing backup data - on its backup media.
Date The data of the last backup in the format DD MMM YYYY.
Time The time of the last backup in the format HH:MM:SS.
In ATMF Whether the node shown is active in the AMF network, (Yes or No).
Status The output can contain one of four values:
■ “-” meaning that the status file cannot be found or cannot be read.
■ “Errors” meaning that there are issues - note that the backup may still be deemed
successful depending on the errors.
■ “Stopped” meaning that the backup attempt was manually aborted;.
■ “Good” meaning that the backup was completed successfully.
Log File Location All backup attempts will generate a result log file in the identified directory based on the node
name. In the above example this would be: card:/amf/office/logs/rsync_amf_testbox1.log.
Log Details The contents of the backup log file.
server-status Displays connectivity diagnostics information for each configured remove file server.