Specifications

AMF Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 217
erase factory-default
This command erases all data from NVS and all data from flash excluding the following:
■ The current release file and its /flash/.release file
■ The backup release file and /flash/.backup file
■ v1 license files /flash/.configs/.swfeature.lic
■ v2 license files /flash/.configs/.sw_v2.lic
The device is then rebooted and returns the switch to its factory default condition. The
switch can then bu used for automatic node recovery.
Syntax erase factory-default
Mode
Global Configuration.
Usage This command is an alias to the atmf cleanup command on page 174.
Example To erase data, use the command:
Related Commands atmf cleanup
Node_1(config)#
erase factory-default
This command will erase all NVS, all flash contents except
for the boot release, and any license files, and then
reboot the switch. Continue? (y/n):y