Specifications

AMF Commands
216 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
Examples To set a packet debug on node 1 with level 1 and no timeout, use the command:
To set a packet debug with level 3 and filter packets received from AMF node 1:
To enable send and receive 500 packets only on vlink1 for packet types 1, 7, and 11, use
the command:
Example This example applies the debug atmf packet command and combines many of its options:
.
node_1#
debug atmf packet direction tx timeout 0
node_1#
debug atmf packet direction tx level 3 filter
node_1
node_1#
debug atmf packet num-pkts 500 filter interface
vlink1 pkt-type 1 7 11
node_1#
debug atmf packet direction rx level 1 num-pkts
60 filter node x900 interface port1.1.1 pkt-
type 4 7 10
Note
In this example the local switch is an x8100 that is filtering traffic on its port
1.1.1 from a remote x900 switch.