Specifications

AMF Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 215
pkts The actual number of packets
filter Sets debug to filter packets
node Sets the filter on packets for a particular Node
<name> The name of the remote node
interface Sets the filter to dump packets from an interface (portx.x.x) on the
local node
ifname Interface port or virtual-link
pkt-type Sets the filter on packets with a particular AMF packet type
1 Crosslink Hello BPDU packet with crosslink links information. Enter
1 to select this packet type.
2 Crosslink Hello BPDU packet with downlink domain information.
Enter 2 to select this packet type.
3 Crosslink Hello BPDU packet with uplink information. Enter 3 to
select this packet type.
4 Downlink and uplink hello BPDU packets. Enter 4 to select this
packet type.
5 Non broadcast hello unicast packets. Enter 5 to select this packet
type.
6 Stack hello unicast packets. Enter 6 to select this packet type.
7 Database description. Enter 7 to select this packet type.
8 DBE request. Enter 8 to select this packet type.
9 DBE update. Enter 9 to select this packet type.
10 DBE bitmap update. Enter 10 to select this packet type.
11 DBE acknowledgment. Enter 11 to select this packet type.
Parameter Description