Specifications

AMF Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 207
atmf restricted-login
This command restricts the use of the “atmf working-set” on page 210 command on all
AMF master nodes to privilege 15 users only. Once entered on any AMF master node, this
command will propagate across the network.
Note that once you have run this command, certain other commands that utilize the AMF
working-set command, such as the include, atmf reboot-rolling and show atmf group
members commands, will operate only on master nodes.
Use the no variant of this command to disable restricted login on the AMF network. This
allows access to the atmf working-set command from any node in the AMF network.
Syntax atmf restricted-login
no atmf restricted-login
Mode
Privileged Exec
Default Master nodes operate with atmf restricted-login disabled.
Member nodes operate with atmf restricted-login enabled.
Example To enable restricted login, use the command
Validation
Command
show atmf
Note
The default conditions of this command vary from those applied by its “no”
variant. This is because the restricted-login action is only applied by master
nodes, and in the absence of a master node, the default is to apply the restricted
action to all member nodes with AMF configured.
In the presence of a master node, its default of “atmf restricted-login disabled”
will permeate to all its member nodes. Similarly, any change in this command’s
status that is made on a master node, will also permeate to all its member nodes
Node_20(config)#
atmf restricted-login node20