Specifications

AMF Commands
188 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
atmf provision
This command configures a specified port on an AMF node to accept a provisioned node,
via an AMF link, some time in the future.
Use the no variant of this command to remove the provisioning on the node.
Syntax atmf provision [<nodename>]
no atmf provision
Default No provision.
Mode Interface Configuration
Usage The port should be configured as an AMF link or cross link and should be “down” to add or
remove a provisioned node.
Example To provision an AMF node named node1 for port1.0.1, use the command:
Related Commands switchport atmf-link
switchport atmf-crosslink
show atmf links
Parameter Description
<nodename> The name of the provisioned node that will appear on
the AMF network in the future.
host1(config)#
interface port1.0.1
host1(config-if)#
atmf provision node1