Specifications

AMF Commands
174 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
atmf cleanup
This command erases all data from NVS and all data from Flash excluding the following:
■ The current release file and its /flash/.release file
■ The backup release file and /flash/.backup file
■ v1 license files /flash/.configs/.swfeature.lic
■ v2 license files /flash/.configs/.sw_v2.lic
It then reboots to put the device in a clean state ready to be used as a replacement node
on a provisioned port.
Syntax atmf cleanup
Mode
Privileged Exec
Usage This command is an alias to the erase factory-default command on page 217.
Example To erase data, use the command:
Related Commands erase factory-default
Node_1(config)#
atmf cleanup
This command will erase all NVS, all flash contents except
for the boot release, and any license files, and then
reboot the switch. Continue? (y/n):y