Specifications

AMF Introduction and Configuration
150 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
In order to retain connectivity to the AMF network, AMF link and crosslink settings should
not be changed. In the example above you can see that port1.1.5is an automatically
configured AMF link. You can also see the error message indicating it was skipped by the
switchport mode access command. This is because AMF links must be in trunk mode.
awplus(config-if)#
no shutdown
awplus(config-if)#
exit
awplus(config-if)#
vlan database
awplus(config-if)#
no vlan 4090
awplus(config-if)#
end
Caution
No changes should be made to the device's configuration while a node
recovery is underway. A log message will appear on the console or other
logged in session indicating when recovery has finished (whether
successfully or with errors). This message can also be found by viewing the
log with the command show log.