Specifications

AMF Introduction and Configuration
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 119
You can then check that the nodes have synchronised with the NTP server using the show
ntp status command, for example:
Configuring AMF
The following configuration example uses a simplified network to explain the steps
required to configure AMF.
Figure 4: Simple AMF single master example
awplus#
show ntp status
awplus#show ntp status
Clock is synchronized, stratum 13, reference is 172.31.0.1
actual frequency is 7.1420 PPM, precision is 2**-18
reference time is d7bba834.19f1a68f (16:48:52.101 utc Thu Sep 11
2014)
clock offset is -1.286 msec, root delay is 2.237 msec
root dispersion is 45.213 msec
Member 1
Member 2
Member 4
Member 3
port1.0.1
AMF crosslink
AMF up/down link
port1.1.3
port1.1.3
port1.0.1
port1.1.2
port1.1.2
port1.1.1
port1.1.2
port1.1.1
port1.1.1
AMF
Master 1