Specifications

ISSU Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 105
show system
This command displays general system information about the device, including the
hardware installed, memory, and software versions loaded. It also displays location and
contact details when these have been set.
Note that this command will also display a warning message when ISSU is in progress.
For information on output options, see “Controlling “show” command output” in the
Getting Started chapter.
Syntax show system
Mode User Exec and Privileged Exec
Usage Entering this command will display the information for the entire system. In a stacked
configuration a heading will be displayed to distinguish the different information for each
stack member.
Example To display configuration information, use the command:
Output Figure 6: Example output from the show system command
Related Commands show system environment
awplus#
show system
swi_a_1350_1000#show system
Switch System Status Tue Apr 15 13:26:13 2014
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Chassis 315 AT-SBx8112 E-0 A042764112500072
Controller 316 Bay5 AT-SBx81CFC960 F-0 A042854111400005
Controller 316 Bay6 AT-SBx81CFC960 F-0 A042854112500015
Blade 317 Bay7 AT-SBx81GP24 C-0 A042774102900003
Blade 351 Bay12 AT-SBx81GT24 D-1 A044024112500020
PSU 320 PSUA AT-SBxPWRPOE1/AC A-0 -
PSU 319 PSUD AT-SBxPWRSYS1/AC A-0 -
Fan module 321 FAN1 AT-SBxFAN12 E-0 A042844112500016
--------------------------------------------------------------------------------
RAM: Total: 512580 kB Free: 357016 kB
Flash: 126.0MB Used: 38.5MB Available: 87.5MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime : 1 days 00:48:55
Bootloader version : 2.0.9
Current software : Software Version 5.4.4-1.1 or later
Software version : SBx81CFC960-5.4.4-1.2.rel
Build date : Mon Apr 14 11:43:54 NZST 2014
Warning: ISSU is currently in progress.
System may be running with different software versions
Current boot config: flash:/default.cfg (file exists)
System Name
awplus
System Contact
System Location