Specifications

ISSU Commands
New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions 99
Figure 3: Example output from the show boot command
Table 1: Parameters in the output of the show boot command
Related Commands autoboot enable
boot config-file backup
boot system backup
awplus#show boot
Boot configuration
----------------------------------------------------------------
Current software : SBx81CFC960-5.4.4-1.2.rel
Current boot image : flash:/SBx81CFC960-5.4.4-1.2.rel
Backup boot image : flash:/SBx81CFC960-5.4.4-1.1.rel
Default boot config: flash:/default.cfg
Current boot config: flash:/my.cfg (file exists)
Backup boot config: flash:/backup.cfg (file not found)
Parameter Description
Current software The current software release that the device is using.
Current boot image The boot image currently configured for use during the
next boot cycle.
Backup boot image The boot image to use during the next boot cycle if the
device cannot load the main image.
Default boot config The default startup configuration file. The device loads
this configuration script if no file is set as the startup-
config file.
Current boot config The configuration file currently configured as the
startup-config file. The device loads this configuration file
during the next boot cycle if this file exists.
Backup boot config The configuration file to use during the next boot cycle if
the main configuration file cannot be loaded.