Specifications

ISSU Commands
96 New and Enhanced Features in AlliedWare Plus 5.4.4 Major and Minor Versions
issu rejoin-timeout
This command configures the ISSU CFC rejoin timeout that will be applied to each CFC.
Following a reboot, this timeout sets the period that the ISSU process will wait for each
CFC to join the chassis. If any of the CFC cards fail to rejoin the chassis within the period
configured by this command, the ISSU process is aborted.
The no variant of this command resets ISSU node rejoin timeout to its default value.
Syntax issu rejoin-timeout <7-30>
no issu rejoin-timeout
Default
10 minutes before timing out.
Mode Global Configuration
Examples To change the ISSU node rejoin timeout to 15 minutes, use the command:
Related Commands issu abort-timeout
issu boot
show issu
Note
The ISSU process will only operate with CFC960 cards.
Parameter Description
<7-30> The number of minutes set for the timeout period.
awplus#
configure terminal
awplus(config)#
issu rejoin-timeout 15