Instruction Manual

BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL T6
25
operation feel, and provide
positive and negative curve
adjustment of the three
channels of the aileron lifting
direction.
3. Press the FLIP button until you get to the EXP setting EXP flashes.
4. Press the MODE button to enter the setting. Display 1 and the quantization digital module flash. Press the MODE button
until you select the desired channel.
5. Increase or decrease the value by scrolling up or down.
6. Press the MODE button to accept the setting and move to the next channel.
7. After all settings are made, press the MODE button to save them. Press the END button 2x to exit the settings.
changes quickly and the two ends change
slowly. When it is negative, the middle
change is slow, and the two ends change
quickly. The curve index setting value is -
100% - +100%.
The following figure describes the effect of the curve index on the manipulated output.
Joystick index curve value is 0 The value of the joystick index curve is 60 The value of the joystick index curve is -60
THROTTLE CURVE SETTING
Functions
How to Set Up
Description
Stick’s swing angle
Stick’s swing angle
Stick’s swing angle