Instruction Manual

BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL T6

servo for purposeful

operations

3. Press the MODE button again to select the channel to be adjusted, the corresponding channel number flashes, and

Reverse and other channel numbers stop flashing.

4. Press the up or down button to reverse the icon, press the MODE button to confirm the setting and skip to the next

channel, and press END button to exit the setting.

confirmation key to save the setting result. It

is recommended that the user set it without

the propeller installed on the main motor to

avoid injuries caused by sudden rotating of

the propellers.

DUAL RATE

Functions

How to set up

Desciption

Set the amount of rudders for

the three channels of the

aileron in the lifting direction,

and set the required values

for the up, down, left, and

right of the stick. This

function is used to adapt to

the stroke of the servo or

adjust the control feel.

1. power - on status

2. Press the MODE button for one second, it will beep, REVERSE and 123456 will blink.

3. Press the FLIP button until you get to the D/R setting, D/R and 12 4 will blink.

4. Press the MODE button to go to the setting. Channel 1 flashes. Use the lever to select the desired channel. The selected

channel flashes. Use the up or down button to extend or shorten the path.

5. Press the MODE button to confirm and save the setting. Press the END button 2x to exit the setting.

CURVE EXP SETTING

Functions

How to set up

Description

Provide users with joystick

curve adjustment, improve

1. power - on status

2. Press the MODE button for one second, it will beep, REVERSE and 123456 will blink.

The joystick curve index is positive, which

means that the middle of the joystick