Instructions

Thanks for choosing series model.
Please read our instructions carefully, and following our
assembling, painting and debugging by yourself.
Transmitter Motor 2.2g Servo Li-poReceiver Mini ESC Charger
also need to buy: Coating, Masking Tape, Seam Glue, Utility Knife.
Coating
Masking Tape
Utility KnifeSeam Glue
Besides, in order to upgrade your model, following light material you also need
to buy: Mini Lamp control, 4mm LED bulb, smd LED, balance weight.
Lamp Control Balance Weight
4mm LED SMD LED
ATTENTION
126mm 57mm 63mm 50mm 77mm
L W H T W.H
Technische Daten
WARNING
TIPS
After finish assembling the model, please do not use any
large strength to push the model, since the inside have high
reduction ratio gearwheel and mini transmission system, if do
will cause the transmission system be damaged!
Since the model have the mini c onnection parts a nd
simulation parts inside, please avoid the model be altitude
fall or squeezed, otherwise, it will cause the damage of mini
connection parts and simulation parts!
Please do not put the model in the sun at long time, otherwise,
it will accelerate aging of the plastic and rubber parts!
The plastic bag of kits, after using please promptly put away
or throws into the recyclable rubbish bin, If get by child, might
have choking hazard!
Before assembling, please according the instructions tips to
open and take out corresponding package, ready for all the
tool you need(please not open all the package, it will cause the
parts lost or confused
)
. Because some spare parts are really
very small, especially the screw etc., which is easily missing,
the model will be upgraded.
During assembling the spare parts, please do not use over
strength or else will cause the spare parts break or drop.
The kits are not suitable for child under 14 years old !
The kits including many mini parts, if the child
inhalation or mistake eaten, can cause choking
or other serious hazard!
Please be sure put the model at the place
where child can not touch it!
L
W
T
W.H
H
WARNING
The kits are not including the following parts which you need to buy: