Owner manual

INEAR

ISPLACEMENT

RANSDUCERS

955A BRIK

GEN III Analog LDT

Series 956

ABSOLUTE PROCESS CONTROL

KNOW WHERE YOU ARE... REGARDLESS

INSTALLATION MANUAL

Includes 955A

Programming & Maintenance

Instructions Plus Accessory Guide

955 Series

PAGE 1
Series 956 955 Series INSTALLATION MANUAL LINEAR DISPLACEMENT TRANSDUCERS 955A BRIK GEN III Analog LDT Includes 955A Programming & Maintenance Instructions Plus Accessory Guide ABSOLUTE PROCESS CONTROL KNOW WHERE YOU ARE...
PAGE 2
Introduction The 955A BRIK Gen III is an accurate programmable, autotuning, non-contact, linear displacement transducer in an economical, low proﬁle package. The transducer utilizes our ﬁeld proven magnetostrictive technology to give absolute position, repeatable to .006% of the programmable sensing distance. The streamlined anodized aluminum extrusion houses the sensing element and electronics. The magnet moves over the sensing element that determines the position and converts it to an analog output.
PAGE 3
Speciﬁcations Input Voltage 13.5 to 30 VDC Current Draw 2.5 Watts Maximum, 120 mA @ 15 VDC Typical Output 0 to 10 VDC 10 to 0 VDC 4 to 20 mA 20 to 4 mA Dimensions Floating Magnet Assembly (SD0522100) S Resolution Internal Analog Output 0.001” 16 Bit (1 part in 65,535) Non-Linearity +/- 0.05% of Stroke Repeatbility +/- 0.
PAGE 4
Other Products Copyright 2004 by AMETEK AUTOMATION & PROCESS TECHNOLOGIES. All Rights Reserved. Made in the USA. 1080 N. Crooks Road, Clawson, MI 48017-1097 Phone 248-435-0700 Toll Free 800-635-0289 Fax 248-435-8120 www.AMETEKAPT.com 955A.M1R1 3/08.