User Manual

48
1080 N. Crooks Road • Clawson, MI 48017 • 800.635.0289 • 248.435.0700 • Fax [phone] • www.ametekapt.com
AUTOMATION & PROCESS
TECHNOLOGIES
955
Input Voltage
13.5to30VDC
Current Draw
2.5WattsMaximum,
120mA@15VDCTypical
Output
Analog:0to10VDC,10to0VDC,
4to20mA,20to4mA.
Digital:ControlPulse,Variable
Pulse,Start/Stop
Quadrature:A+,A-,B+,B-,Z+,Z-
Line Drivers:5VorInputPower
Resolution
Internal:
Analog Output:
Digital Output:
Quadrature:
Non-Linearity
+/- 0.05% of Stroke
Repeatability
+/- 0.006% of Full Stroke
Hysteresis
+/- 0.02% of Full Scale
Update
Analog
50” or less:
51” to 100”:
101” to 150”:
151” to 180”:
Digital
Operating Temperature
-20to70C
Span Length
5”to180”
Null Zone
3.00”
Dead Zone
2.00”
LED
TricolordiagnosticLEDforcommunicationof
LDTstatus.
Connector
955CA:
955CD:
955C DQ:
Approvals
CE
Enclosure
IP67
IP68Optional
0.001”
16Bit(1partin65,535)
ControllerDependent
0.001”
1ms
2ms
3ms
4ms
ControllerDependent
Specications are subject to change without notice.
Specications are based on a typical 36” LDT.
SPECIFICATIONS
o
o
Standard5PinMicro12mmEuroConnector
Standard6PinMicro12mmEuroConnector
Standard12PinMicro(optionE)
12mmEuroConnectoror10PinHRS(optionH)
LDT Specifications
It is recommended to use one mounting
bracket on each end and every 3 feet between.
It is recommended to use one pair of mounting
brackets on each end and every 3 feet between.
Side Mounting Foot
Part No. SD0559200
End Mounting Foot
Part No. SD0530600
Top Mounting Foot
Part No. SD0522000
Mounting Options for the 955C