User Manual

22
1080 N. Crooks Road • Clawson, MI 48017 • 800.635.0289 • 248.435.0700 • Fax [phone] • www.ametekapt.com
AUTOMATION & PROCESS
TECHNOLOGIES
952
Wiring Diagram
BLUE
WHITE
GRAY
PURPLE
BLACK
RED
-INTERROGATION
+GATE
+INTERROGATION
-15 VDC FOR BIPOLAR
POWER SUPPLY
+15 TO +26 VDC
BROWN
-GATE
PIN-OUT FOR STANDARD
CIRCULAR CONNECTOR
AT TRANSDUCER HEAD
GREEN
ORANGE
YELLOW
NO CONNECTION
NO CONNECTION
NO CONNECTION
POWER SUPPLY
COMMON
PIN- C
PIN- B
PIN- J
PIN- K
PIN- A
PIN- F
PIN- E
PIN- D
PIN- G
PIN- H
POWER SUPPLY*
* FOR UNIPOLAR POWER SUPPLY, IT IS RECOMMENDED
TO CONNECT THIS WIRE TO POWER SUPPLY COMMON
Note 1:Onunsupportedstrokelengthsgreaterthan
4feet,rodsupportbracket(s)andaspecialmagnet
shouldbeused.
Note 2:Specifyasmagnetseparatelineitem
(standardmagnetisSD0400800).
Part Numbering
952VP 0120
Stroke Length
Insert stroke length to 0.1 inch. Enter as
a four-place number. Example: A 12.0”
stroke enters as 0120. To convert metric
strokes, multiply millimeter value by
0.03937 for inch value.
EXX
Null Zone
X
Standard 2 inches.
N_
Insert non-standard Null Zone over
2 inches. (Add non-standard portion
of Null length to stroke length to
calculate list price)
Connector Option
E
Environmental MS connector*
C_
Potted pigtail cable assembly, insert
pigtail length in feet. Example: C6 = 6
foot cable.
T
Threaded metal connector
(ts MTS - “RB” on Tempo II
TM
or III)
Consult factory for other connector options.
Dead Band
X
Standard 2.5 inches.
D_
Insert non-standard Dead Band over
2.5 inches. (add non-standard portion
of Dead Band length to stroke length
to calculate list price)
*IfoptionE(environmentalconnector)isselected,mating
connectorand/orcableassemblymustbeorderedseparately.
Variable Pulse
BlueOx
I
Interrogation Mode
I
Internal Interrogation
E
IExternal Interrogation
001
Recirculations Required
001 (standard) to 127
952VP BlueOx