User Manual

20
1080 N. Crooks Road • Clawson, MI 48017 • 800.635.0289 • 248.435.0700 • Fax [phone] • www.ametekapt.com
AUTOMATION & PROCESS
TECHNOLOGIES
952
Note 1: Onunsupportedstrokelengthsgreaterthan4feet,rod
supportbracket(s)andaspecialmagnetshouldbeused.
Note 2: Specifymagnetasseparatelineitem(standardmagnet
isSD0400800).
Wiring Diagram Option “E”
LDTConnectorView
UseEuroConnector(micro12mmsingle
keyway)cordsets,availablefrommostconnector
manufacturersorpurchasedfromAmetek.
3
2
4
1
Power 15 to 30 VDC
(brown wire)
Position
Output
(black wire)
Power Supply Common
(blue wire)
Program Input
(white wire)
5
Position Common
(gray wire)
Wiring Diagram
Option “S”
WHITE
BLUE
BROWN
GRAY
RED
BLACK
PROGRAM INPUT
NO CONNECTION
POSITION OUTPUT
POSITION COMMON
+15/+30 VDC
POWER SUPPLY
ORANGE
NO CONNECTION
PIN-OUT FOR STANDARD
CIRCULAR CONNECTO
AT TRANSDUCER HEAD
GREEN
YELLOW
PURPLE
NO CONNECTION
2nd POSITION COMMON
2nd POWER SUPPLY
COMMON
POWER INPUT
COMMON
PIN- B
PIN- C
PIN- K
PIN- E
PIN- F
PIN- A
PIN- G
PIN- D
PIN- H
PIN- J
Part Numbering
952A 0120
Stroke Length
Insert stroke length to 0.1 inch. Enter as
a four-place number. Example: A 12.0”
stroke enters as 0120. To convert metric
strokes, multiply millimeter value by
0.03937 for inch value.
EXX
Null Zone
X
Standard 2 inches.
N_
Insert non-standard Null Zone over
2 inches. (Add non-standard portion
of Null length to stroke length to
calculate list price)
Connector Option
S
Standard 12mm 5 pin Euro connector
( CE Approved )*
E
Environmental MS connector*
C_
Potted pigtail cable assembly, insert
pigtail length in feet. Example: C6 = 6
foot cable.
T
Threaded metal connector
(ts MTS - “RB” on Tempo II
TM
or III)
NC
Non-corrosive Stainless Steel, 12mm
5 Pin Euro Connector and Cover. Use
cable P/N 949013 straight connector.
Consult factory for other connector options.
Dead Band
X
Standard 2.5 inches.
D_
Insert non-standard Dead Band over
2.5 inches. (add non-standard portion
of Dead Band length to stroke length
to calculate list price)
*IfoptionSorE(environmentalconnector)isselected,mating
connectorand/orcableassemblymustbeorderedseparately.
Analog
BlueOx
V0
Output
V0
0 to 10 VDC
V1
10 to 0 VDC
C4
4 to 20mA
C2
20 to 4mA
D0
Differential 0 to 10 VDC*
D1
Differential 4 to 20mA*
*Analog differential output is the
difference between two magnets,
minimum distance is 2.5”
952A BlueOx