User Manual

11
1080 N. Crooks Road • Clawson, MI 48017 • 800.635.0289 • 248.435.0700 • Fax [phone] • www.ametekapt.com
AUTOMATION & PROCESS
TECHNOLOGIES
950IS
NOTE 1:AcompletesystemconsistsofanLDT,
aGemcoMagnet,aTranceiverandISBarrier.
ISBarrierandPanelMountBracketareordered
separately.ISBarrierP/N04517039.PanelMount
BracketforBarrierP/N04517214.
NOTE 2:This950ISmodeltransducermustusea
Gemcostylemagnet.Seepages60-62formagnet
options.
NOTE 3:AllIntrinsicallySafeLDTsincludea6ft.
cablewithastraightconnector,P/N04521210.
Consultthefactoryforlongerlengthsandright
angleversions.
NOTE 4: Specifymagnetstyledesiredasseparate
lineitem.ModelnumberSD0400800isstandard.
NOTE 5: The950ISisNOTcompatiblewith
competitivestylemagnets.The950ISMUSTuse
Gemcostylemagnets.
9501446 012024
Input Voltage
24
24 VDC
115
115 VAC
230
230 VAC
Analog
Transceiver for
950IS LDT
Stroke Length
Insert stroke length to 0.1 inch. Enter as a four-
place number. Example: A 12.0” stroke enters
as 0120. To convert metric strokes, multiply
millimeter value by 0.03937 for inch value.
9501445 0120
950IS
Intrinsically
Safe LDT
Stroke Length
Insert stroke length to 0.1 inch. Enter as a four-
place number. Example: A 12.0” stroke enters
as 0120. To convert metric strokes, multiply
millimeter value by 0.03937 for inch value.
I.S.Barrier
Approved
Conduit
Seal
Outputs
Input
Voltage
9501445Configuration
The Gemco 950IS Intrinsically Safe LDT