SDS

ManualsBrandsAmes ManualsPaintClear Seal 5 gal. Semi Clear Acrylic Polymer

Page 1 of 11

Ames’

Clear Seal

™

Pro

duct Name (as used on Label and List)

olor: Clear

Revision Date:

2-15-18

GHS Safety Data Sheets (SDS)

SECTION 1 – IDENTIFICATION

PRODUCT NAME

Ames’

Clear Seal

™

OTHER MEANS OF

IDENTIFICATION

END USE

Use on stucco, concrete, wood siding, log homes & vertical

well drained surfaces.

MANUFACTURER

Ames Research Laboratories, Inc.

Salem, Oregon 97302

Corporate Office:

1891 16

Street SE

Salem, Oregon 97302-1436

(503) 588-3330

EMERGENCY PHONE

NUMBER

1-888-345-0809 or Chemtrec 1-800-424-9300

SECTION 2 – HAZARD IDENTIFICATION

CLASSIFICATION

Acute Toxicity, Dermal – 5:

Serious Eye Damage/Eye Irritation – 2B:

Acute Toxicity, Inhalation – 5:

SIGNAL WORD

WARNING

HAZARD STATEMENT

May be harmful in contact with skin (H313)

Causes eye irritation (H320)

May be harmful if inhaled (H333)

HAZARD PICTOGRAMS

N.A. – No Symbol

PRECAUTIONARY

STATEMENT(S)

Wear protective gloves/protective clothing/eye

protection/face protection. Avoid breathing

dust/fume/gas/mist/vapor/spray. Use in well-ventilated

areas. If hands or other body parts come in contact, wash

thoroughly after handling.

IF IN EYES: Rinse cautiously with water for several

minutes. Remove contact lenses, if present and easy to do

so. Continue rinsing. (P305+P351+P338) If eye irritation

persists: Get medical attention from a physician.

(P337+P313)

IF ON SKIN OR INHALED: Call a POISION CENTER

or doctor/physician if you feel unwell. (P304+P312)

HAZARDS NOT

OTHERWISE

CLASSIFIED

N.A.

Summary of content (11 pages)

PAGE 1
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) SECTION 1 – IDENTIFICATION PRODUCT NAME Ames’® Clear Seal™ OTHER MEANS OF CS IDENTIFICATION END USE Use on stucco, concrete, wood siding, log homes & vertical well drained surfaces. MANUFACTURER Ames Research Laboratories, Inc.
PAGE 2
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) SECTION 3 – COMPOSITION/INFORMATION ON INGREDIENTS SUBSTANCE / Mixture MIXTURE OTHER MEANS OF N. A. IDENTIFICATION CAS # / IDENTIFIERS INGREDIENT NAME % BY WEIGHT CAS NUMBER Acrylic-Styrene 90 – 98 % Proprietary Polymer Any concentrations shown in a range are to protect trade secret confidentiality or is due to batch variation.
PAGE 3
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) SECTION 5 – FIRE FIGHTING MEASURES EXTINGUISHING To extinguish combustible residues of this product, use MEDIA: SUITABLE water fog, CO2, dry chemical or chemical foam or alcoholMEDIA resistant foam. EXTINGUISHING N/A MEDIA: UNSUITABLE MEDIA SPECIFIC HAZARDS Under fire conditions, some components of this product ARISING FROM THE may decompose.
PAGE 4
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) SECTION 7 – HANDLING AND STORAGE PRECAUTIONS FOR SAFE HANDLING PROTECTIVE Use in a well ventilated area. Keep out of reach of children. MEASURES If user operations generate dust, fume, or mist, use ventilation to keep exposure to airborne contaminants below the respective exposure limits. Use goggles and gloves. Similar to most latex paints.
PAGE 5
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE PHYSICAL STATE Liquid COLOR Milky clear ODOR Slight ammonia odor ODOR THRESHOLD N/A pH 9.0-10 MELTING POINT N/A BOILING POINT 212° F (100° F) FREEZING POINT 32° F (0° C) FLASH POINT N.A. EVAPORATION RATE N/A FLAMMABILITY (SOLID, N/A GAS) UPPER / LOWER N.A.
PAGE 6
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) SECTION 11 – TOXICOLOGICAL INFORMATION INFORMATION ON TOXICOLOGICAL EFFECTS ACUTE TOXICITY May cause slight transient (temporary) eye irritation. Corneal injury unlikely. Short single exposure not likely to cause significant skin irritation. Prolonged and repeated exposure may cause slight skin irritation. Material may stick to skin causing irritation upon removal.
PAGE 7
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) INGESTION Single dose oral toxicity is considered to be extremely low. No hazards anticipated from swallowing small amounts incidental to normal handling operations.
PAGE 8
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) SECTION 12 – ECOLOGICAL INFORMATION TOXICITY Based largely or completely on information for similar material(s): Material is practically non-toxic to aquatic organisms on an acute basis (LC50 or EC50 > 100 mg/L in the most sensitive species tested). PERSISTENCE AND The polymeric component is not expected to biodegrade.
PAGE 9
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) product is packaged suitably for the mode of transport. All packaging must be reviewed for suitability prior to shipment, and compliance with the applicable regulations is the sole responsibility of the person offering the product for transport.
PAGE 10
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) Additional Canadian Regulatory Information: This product does not contain a substance present on the WHMIS Ingredient Disclosure List (IDL) at or above the specified concentration limit.
PAGE 11
Ames’® Clear Seal™ Product Name (as used on Label and List) Color: Clear Revision Date: 2-15-18 GHS Safety Data Sheets (SDS) effective date herein. However, no warranty, express or implied, is given, The information presented here applies only to the product as shipped. The addition of a material can change the composition, hazards and risks of the product. Regulatory requirements are subject to change and may differ between various locations and jurisdictions.