TDS
Table Of Contents
- Stock Code
- BWRF Series
- Packaging Information
- Characteristics
- Compliance
- Surface Preparation
- Concrete
- Concrete Masonry Unit (CMU)
- OSB, Plywood, Lumber, Pressure-Treated Wood
- Application Methods
- Application Instructions
- The information and specifications set forth in this Technical Data Sheet are based on tests conducted by or on behalf of Ames Research Laboratories, Inc. All information is subject to change and pertains to the product available at time of publicatio...
Footing Drain
(recommended)
Exterior
Below Grade Wall
Step 1
Caulk cracks
and joints using Blue Max® Caulk
Step 2
Apply Block and Wall™ to 90 degree cracks & joint, let dry.
Apply self-adhesive Seam Tape over dried
Block and Wall™. (For improved performance
coat tape with additional Block and Wall™ and let dry).
Step 3
Top coat of Block and Wall™
Step 4
Second Top coat of Block and Wall™
Foundation
Footing
Drain Protection Board
(recommended)
Exterior Below Grade Wall or Retaining Wall Waterproofing System Details
Step 1
Blue Max ® Caulk
cracks and joints
Step 2
Apply Block and Wall™ to 90 degree joint, let dry.
Apply Poly-Bridge® over dried Block and Wall™.
(For improved performance coat Poly-Bridge® with
additional Block and Wall™, let dry).
Step 3
Top coat of
Block and Wall™
Step 4
Second Top coat of
Block and Wall™
Interior
Below Grade Wall
For cracks and expansion joints,
install Poly-Bridge® fabric
embedded in Block and Wall™.
Then top coat with Block and Wall™.
Step 2 - As needed
For cracks and expansion joints,
install poly-bridge fabric
embedded in Block and Wall™.
Then top coat with Block and Wall™.
Step 2 - As needed
Interior Below Grade & Basement Wall Waterproofing System Details