Manual

9
MAINTENANCE INSTRUCTIONS
5. Remove the two rear mounting nuts from exterior
of body.
6. While depressing tong tool handle, work rear
mounting link away from port tube. (Caution:
considerable tension is on tong tool hold  rmly).
7. Slowly release controlled pressure on tong tool
handle until tension is relieved from springs.
8. Remove tong tool from device.
9. Remove 2 -
3
⁄8" mounting bolts from front of
body.
10. Remove knuckle joint assembly from body.
11. Reinstall new knuckle joint assembly by reversing
above procedure.
DRAWING III