Getting Started Guide

Warning: Do not disassemble or modify this light. Modification voids the manufacturer’s warranty and any applicable regulatory
certifications this light may possess.
Limited Warranty
Under normal use and conditions, AmerTac provides to the original purchaser of this product a one year limited express warranty that is set forth
in the Limited Warranty stated in full at www.amertac.com/warranties. The Limited Warranty is in lieu of all other express or implied warranties
or liabilities subject to the exceptions explained fully in the Limited Warranty on the website.
Specifications
©2021 AmerTac
™
250 Boulder Drive
Breinigsville, PA 18031
amertac.com
Made in China
UC_TL_014_1121
Product SKU Size Weight Color Temperature* Lumens CRI Wattage Linking
Mounting Screw
Spacing
3000K, 4000K,
5000K
*3000K-5000K with app
80
Up to
240W
PPCCT-L24W-WIFI 24”L x 3.00”W x 0.96”H
1.2 lb
1350lm 18W
23
”
WI-FI ENABLED PIVOTING UNDER CABINET LIGHT
WiFi Pairing
At first power-on, your light may flash to indicate it has entered pairing mode.
If your light is not flashing and you want to enable pairing mode, press and
hold the WHITE ADJUST button until your light begins to flash rapidly (about
4 seconds). After 3 minutes, the device may time out if WiFi pairing is not
completed within this time. To restart the process, press and hold WHITE
ADJUST another three seconds until the light enters pairing mode again.
Download the WESTEK app from Google Play or the App Store. After
registering and creating your account, Click “Add Device”.
Ensure you have WiFi and Bluetooth enabled. Bluetooth is used to pair to the
device to transfer your WiFi information, greatly simplifying the new device
setup process. Ensure you are connected to the same WiFi network as your
device. When ready, click “Auto Scan” to start scanning for your new device.
Select the Under Cabinet Light from the list (it may appear as PPCCT-WIFI).
WiFi Operation
In the Westek app, you’ll see direct access to a power button in the product list page. You may click the power button to enable/disable the product directly, or
click the product name to open its full menu.
On the main page, there is a slider to
adjust brightness from 1% to 100%, as
well as an adjustable white color wheel
to set color temperature to any value
between 3000K and 5000K. Simply use
your finger to slide the brightness and
color temperature to your desired values.
On the Scenes page, you can select from pre-determined
scenes, or create your own scenes for quick access to your
desired brightness and color temperature.
Scenes can be used in your schedules as well, making them
great for automations.
On the schedule page, you can
program specific on/off times
for your lights. You can set a tag
(your personal identifier for that
operation), decide if you want to
receive a push notification from the
app when the schedule is enabled,
and you can choose your preset
action (turn on, turn off, turn on
and dim, or set scene).Note, the
schedule page runs off of the 24-
Hour time format (00:00 to 23:59).
On the sleep timer page, you can set your lights to remain
on for a fixed amount of time, then power off. The power will
remain off when set by sleep timer until the next schedule
event turns it back on, or until you turn it on manually.
Power
Main Page
Scenes
Schedule
Sleep Timer
Main Page
Scenes
Schedule
(Setup)
Schedule
(List)
Sleep Timer
Westek App
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20cm
between the radiator and any part of your body.
PPCCT-L24W-WIFI INSTRUCTION
1
16