User manual

45
B.2.14 Setup display angle
Sets the display angle to compensate for different viewing heights.
1 Select main menu Setup and press OK.
2 Select sub menu
Set Display Angle and press OK.
3 Select viewing angle (
->\ Up, ->| Mid or ->/ Down).
B.3 Setting and using the alarm timer
You can set the alarm function to either a fixed alarm time or use a
count-down timer. You cannot set both an alarm time and the
count-down timer. The default or current value is shown in
parentheses.
1 Select main menu
Alarm/Timer. The display shows current time.
2 Press
OK. Turn the dial one step clockwise to select sub menu
Set Alarm if you want to set an alarm at a fixed time. Press OK
to enter the time in the form HH.MM.SS and press OK again after
entering each time unit.
3 If you want to set a count-down time, turn the dial one step
further to select sub menu
Set Timer. Press OK to enter the
count-down value in the form HH.MM.SS and press OK again
after entering each time unit.
4 Press
ESC to return to the Alarm/Timer menu, which now shows
the set alarm time or count-down time as BzzHH.MM.SS.
5 When the alarm time is due or the count-down timer reaches
00:00:00, an alert display is shown and the module beeps for
30 s, or until
OK is pressed. The display shows the time elapsed
since the alarm and the current time. A second alert display is
shown until OK is pressed.
The alarm timer is based on the internal module clock, which can
be set in the Set Clock menu located after the Set Timer menu. The
clock will be reset when power is turned off.
A set alarm/timer function can be reset by pressing OK in the menu
Alarm/Timer off?
B.4 Service displays
The module has service displays for use by authorised service
personnel. If the service display
Insert Access Code: is accidentally
selected, press ESC to return to the normal operation display.
Insert Access Code:
Alarm/Timer off?
Buzzer 18:34:52
Set Clock
(12:26:53) 12:3
6:53
!! Alarm time !!
00:00:29 13:08:45
!! Alarm time !!
Alarm/Timer 12:35:16
Buzzer 00:33:00
Set Timer
(18:34:52) 00.00.00
Set Alarm 12:32:21
(0) 00.00.00
Alarm/Timer 12:30:52
Set Display Angle
Monitor UPC-900
User Manual 18-1125-55 Edition AE
Reference information B