User manual

2 Press OK to access the settings menu. Press OK.
3 Set the desired zero value. The range is 0.000 - 999.9 mS/cm.
Press
OK to acknowledge.
4 Turn the dial clockwise to access the settings menu. Press OK.
5 Set the desired full scale value. The range is 0.000 - 999.9
mS/cm. Press OK to acknowledge. Press ESC two twice to return
to menu Set Parameters.
Setting the pH analogue output
After having selected
Set Parameters pH and pressed OK, turn the
dial one step clockwise to skip the Calibrate pH menu. Then press
OK.
Note: The pH values for zero level and full scale must differ by at
least 1 pH unit.
Note: The zero level and full scale values can be calibrated in any
order.
1 Current analogue settings are displayed (zero and full scale
values).
2 Press
OK to access the full scale settings menu. Press OK.
3 Set the desired full scale value. The range is pH -0.50 - 14.30.
Press OK to acknowledge.
4 Turn the dial clockwise one step to access the zero level settings
menu. Press OK.
5 Set the desired zero level value. The range is pH -0.50 - 14.30.
Press OK to acknowledge. Press ESC twice to return to
menu Set Parameters.
Setting the UV analogue output
1 Current analogue settings are displayed (zero and full range
values). Allowed full range values are 0.0001, 0.0002, 0.0005,
0.001, 0.002, 0.005, 0.01, 0-02, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0 and
5.0. Zero level is set as a percentage of full scale.
Set UV Analogue Out
Set pH Zero Level
Set pH Zero Level
Set pH Full Scale
Set pH Full Scale
Set pH Analogue Out
Set Cond Full Scale
Set Cond Full Scale
Set Cond Zero Level
Set Cond Zero Level
Monitor UPC-900
User Manual 18-1125-55 Edition AE
15
Operation 3