User manual

2 Installation

2.1 Unpacking

Unpack the module and check the items against the supplied packing

list. Inspect the items for obvious damage that may have occurred

during transportation.

Note: It is important that the filters, flow cells and lamps are not

handled during unpacking. For protection of these items, they should

remain in their packing materials until required for use.

We recommend that all packing materials be retained if onward

transport of the module is expected.

Note: pH measurement is optional in ÄKTA

FPLC.

2.2 General precautions

The module should be located in a place of low temperature

variations, away from heat sources, draughts and direct sunlight.

The module may be operated at normal ambient temperatures in

the range +4 to 40 °C.

The module should be installed on a stable laboratory bench or

in ÄKTA

FPLC

™

system rack. To ensure correct ventilation, a free

space of 0.1 m is required behind and in front of the module. Do not

place soft material under the module to ensure that the ventilation

inlet below the front is not blocked.

UPC-900

CAUTION! Read the following information carefully to ensure

that the module is installed correctly.

Monitor UPC-900

User Manual 18-1125-55 Edition AE

Installation 2