5555555COM VVVVVVVVVVVVVVVVV UPC for Wal-Mart models. B345555555COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do VoV ReVVrV ThiV ProdVcV! Contact our customer service team for help Call: 1-800-489-3351 (toll free) Monday-Friday 9am - 5pm CST ViViV: www.ameriwoodhome.com WARVIVG - Unit can over causing severe injury or death. - Anchor unit to stud in wall (if instructed to).
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help AVVembly TipV Call VV! 1-800-489-3351 Monday-Friday 9am - 5pm CST You Tube ViViV ameriwoodhome.com Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1‐2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly. - Compression dowels are lightly tapped in with a hammer.
k Quic bly m Asse Ti p Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size A B x1 T5993096010 TOP PANEL x1 T5993096020 SIDE RIGHT PANEL C D x1 T5993096030 SIDE LEFT PANEL x1 T5993096040 BOTTOM PANEL E F x1 T5993096050 BACK PANEL x1 T5993096060 DRAWER FACE ameriwoodhome.
Board Identification Not actual size G H x1 T5993096070 DRAWER BOX BACK x1 T5993096080 DRAWER BOTTOM I J x1 T5993096090 DRAWER BOX LEFT x1 T5993096100 DRAWER BOX RIGHT K x4 T5993096110 WOOD LEG ameriwoodhome.
Part List Actual Size 1 2 3 x4 TTA0003 Cam Lock 15-11.5 x4 TTA0001 Cam Bolt 5 x14 TTA0005 CBS 3.5 x 12 (RB) 6 x8 TTA0046 SCREW JCBC M6 X 50 4 7 8 x4 TTA0013 SCREW PHCB 4 X 12 MM (RB) x8 TTA0011 CBS (BLK) M4 X 38 9 10 x8 TTA0053 (BLK) FLAT WASHER 6 x 20 x 1 x12 TTA0016 DOWEL 6 X 30 13 x1 SET TTA0030 DRW BRACKET AMERIWOOD A54223-116MM ameriwoodhome.
Step 1 10 2 x4 TTA0016 DOWEL 6 X 30 14 3 x2 TTA0003 Cam Lock x4 TTA0005 CBS 3.5 x 12 x1 TTA0048 Drawer Slide Q-Fit 350 (BLK) Insert two cam lock, and four dowel into the panel as shown. Attach drawer slide with screw to the side panel as shown. B 2 Quick Assembly Tip Proper orientation of CAM LOCK ameriwoodhome.
Step 2 10 2 x4 TTA0016 DOWEL 6 X 30 14 3 x2 TTA0003 Cam Lock x4 TTA0005 CBS 3.5 x 12 x1 TTA0048 Drawer Slide 350 BLK Insert two cam lock, and four dowel into the panel as shown. Attach drawer slide with screw to the side panel as shown. 3C Quick Assembly Tip Proper orientation of CAM LOCK ameriwoodhome.
Step 3 1 x4 TTA0001 Cam Bolt Insert four cam bolt into the top panel as shown. 1 ameriwoodhome.
Step 4 Attach the side right panel (B) and side left panel (C) to the bottom panel (D) as shown. C B D ameriwoodhome.
Step 5 6 X4 TTA0011 CBS (BLK) M4 X 38 B D C Screwed all the components from step 4 as shown. ameriwoodhome.
Step 6 Attach the top panel (A) to the components from step 5 as shown. A ameriwoodhome.
Step 7 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. 11 x18 TTA0018 NAILS 6/8’’ Attached the back panel (E) as shown nailing straight into the raw edges. Assure that the unit is square. Distance from corner to corner must be equal as shown. E ameriwoodhome.
Step 8 13 5 x4 TTA0046 SCREW JCBC M6 X 50 (BLK) 9 8 x4 TTA0053 FLAT WASHER 6 X 20 X 1 (BLK) x4 TTA0047 SPRING WASHER (BLK) K Attach wood leg (K) to the corner side of bottom panel (D) as shown. K D ameriwoodhome.
Step 9 13 5 9 x4 TTA0046 SCREW JCBC M6 X 50 8 x4 TTA0053 FLAT WASHER 6 X 20 X 1 (BLK) K x4 TTA0047 SPRING WASHER (BLK) Attach wood leg (K) to the corner side of bottom panel (D) as shown. K D ameriwoodhome.
Step 10 12 x1 TTA0030 DRAWER BRACKET I I Insert the drawer bracket to the drawer side left (I). ameriwoodhome.
Step 11 12 x1 TTA0030 DRAWER BRACKET Insert the drawer bracket to the drawer side right (J). 10 J 10 J x5 Set ameriwoodhome.
Step 12 10 x4 TTA0016 DOWEL 6 X 30 Insert four wood dowels to the drawer back (G) as shown. G ameriwoodhome.
Step 13 6 x2 TTA0011 CBS M4 x 38 Attach the drawer back (G) to the drawer side right (J) as shown. G J ameriwoodhome.
Step 14 6 x2 TTA0011 CBS M4 x 38 Attach the drawer side left (I) to the components from step 13 as shown. I ameriwoodhome.
Step 15 Insert drawer bottom (H) to the components from step 14 as shown. H ameriwoodhome.
Step 16 7 x4 TTA0013 PHCB 4 X 12 (RB) Attach drawer front (F) with screw PHCB to the components from step 15 as shown. F ameriwoodhome.
Step 17 4 15 x1 TTA0014 PH M4 X 20 x1 TTA0050 VAUGHN KNOB Attach Vaughn Knob with panhead zink to the upper drawer face (F) as shown. ameriwoodhome.
Step 18 14 3 x1 SET TTA0048 DRAWER SLIDE 350 BLK x6 TTA0005 CBS 3.5 x 12 5 Attach the drawer slide to the bottom of components from step 17 as shown. H ameriwoodhome.
Step 19 Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. ameriwoodhome.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 40 lbs. 18 kg 21 lbs. 10 kg Warning: Risk of injury to persons ‐ do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
ReViVVer yoVr prodVcV Vo receive Vhe followiVV: * Vew VreVd deVailV ‐VVeak peek oV whaV'V Vew * SVrveyV ‐have a voice wiVhiV oVr commVViVy * ExclVVive dealV aVd diVcoVVV codeV * QVick aVd eaVy replacemeVV parV Vervice To reViVVer yoVr prodVcV, viViV ameriwoodhome.
Español CVbierVa DelaVVera Este libro de instrucciones para referencia en el futuro. información IMPORTAVTE de seguridad. Por favor lea y manténgalo Vo ReVreVe eVVe prodVcVo! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 Lunes -Viernes 9am -5pm CST ViViVar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 9 Inserte cuatro pernos de leva en el panel superior como se muestra. Página 10 Fije el panel lateral derecho (B) y el lateral izquierdo (C) al panel inferior (D) como se muestra. Página 11 Atornille todos los componentes del paso 4 como se muestra. Página 12 Fije el panel superior (A) a los componentes del paso 5 como se muestra Página 13 ¡IMPORTANTE! EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE INSTALARSE CORRECTAMENTE.
Español Página 25 Tenga en cuenta que los agujeros del soporte del cajón están ranurados. Los frentes de cajón se pueden ajustar aflojando los tornillos, haciendo los ajustes necesarios y tornillos de ajuste. Página 26 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas -no coloque un televisor sobre muebles.
Français CoVverVVre AvaVV CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTAVTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ve reVoVrVez paV ce prodViV! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez‐VoVV: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale ViViVez: www.ameriwoodhome.com ATTEVTIOV Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 9 Insérez quatre boulons de caméra dans le panneau supérieur comme indiqué. Page 10 Fixez le panneau latéral droit (B) et le panneau latéral gauche (C) au panneau inférieur (D) comme Page 11 Vissez tous les composants à partir de l’étape 4 comme indiqué. Page 12 Fixez le panneau supérieur (A) aux composants à partir de l’étape 5 comme indiqué. Page 13 IMPORTANT! LE PANNEAU ARRIÈRE EST UNE PARTIE STRUCTURELLE DE CET APPAREIL ET DOIT ETRE INSTALLÉ DEBUTEMENT.
Français Page 25 Notez que les trous sont fendus support du tiroir. fronts de tiroir peut être réglé en desserrant les boulons, les ajustements nécessaires et des vis de fixation. Page 26 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de et/ou causer des blessures graves. charge, le meuble pourrait devenir instable, AVERTISSEMENT : Risque de blessure corporelle -ne pas placer une télévision sur ce meuble.
