9833337COM SINGLE PEDESTAL DESK B349833337COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first. Call: 1-800-489-3351 (toll free) Monday-Friday 9am - 5pm CST Visit: www.ameriwoodhome.com WARNING - Unit can tip over causing severe injury or death. - Anchor unit to stud in wall (if instructed to).
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 2-1/2 HOURS - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Tip Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size C B A Left Panel 39833337010 Right Panel 39833337020 Partition 39833337030 F E Bottom 39833337060 H Top 39833337050 ameriwoodhome.
Board Identification Not actual size J J J Vertical Rail 39833337100 DWR SIDE M K L Horizontal Molding 39833337110 DWR SIDE Door 39833337120 Door Front Assembly 39833337130 DWR BACK P Drawer Side 39991140346200C Q Back Panel K983333700 ameriwoodhome.com Drawer Back 39991140032240B Drawer Bottom 39833331160 This piece is not made from wood but is required for the assembly of your unit.
Board Identification This piece is not made from wood but is required for the assembly of your unit. E A J D G Q C H J L DWR BACK DWR SIDE B F I M P K J DWR SIDE ameriwoodhome.
Part List Actual Size 6 1 2 (x13) #A22570 cam lock 7 4 3 (x13) #A22510 cam bolt 8 (x5) #A21660 wood dowel 5 1-1/8" flat head drive fastener 11 12 7/16" screw (x10) #A11080 7/16" flat head screw (x7) #A53600 angle bracket 9 10 (x22) #A12120 (x4) #A21970 (x11) #A12955 (x4) #A17000 8-32 x 3/8" screw (x1) #A11170 5/8" pan head screw (x1) #A89020 rubber bumper 13 (x16) #A21110 nail (x3) #A13410 #8 x 1-3/4" flat head screw Not Actual Size 15 16 (x2) #A54510 drawer bracket am
Part List Not Actual Size 17a Left Cabinet Member 17b Right Cabinet Member 17c Left Drawer Runner 17d Right Drawer Runner 17 (x1) #A56770 slide ameriwoodhome.
STEP 1 Quick 1 2 (x2) #A22570 4 3 (x3) #A22510 Assembly (x1) #A21660 (x3) #A12955 Tip Proper orientation of CAM LOCK finished edge 2 2 2 4 A 1 1 4 J 4 3 ameriwoodhome.
STEP 2 Quick Assembly 1 (x2) #A22570 Tip 4 2 3 (x2) #A22510 (x1) #A21660 After attaching hinge, separate by loosening this screw. (x3) #A12955 Proper orientation of CAM LOCK 15 (x2) #A65640 15 2 finished edge 1 2 4 B 14 4 4 ameriwoodhome.
STEP 3 8 17b 17 (x1) #A56770 (x3) #A11080 Attach the right cabinet member with the screws (8). 8 B 8 8 17b ameriwoodhome.
STEP 4 15 9 16 (x2) #A65640 (x2) #A17000 9 (x1) #A50515 L 9 15 finished edge 15 16 ameriwoodhome.
STEP 5 Quick 1 2 (x2) #A22570 10 (x1) #A11170 (x2) #A22510 Assembly Tip 4 3 (x1) #A21660 (x3) #A12955 Proper orientation of CAM LOCK 11 2 (x1) #A89020 finished edge 2 4 C 1 1 4 10 3 4 J 11 ameriwoodhome.
STEP 6 17a 8 (x1) 17 #A56770 (x3) #A11080 Attach the left cabinet member with the screws (8). C 8 8 8 17a ameriwoodhome.
STEP 7 6 1 4 3 (x4) #A22570 7 (x2) #A12955 (x2) #A21660 (x2) #A53600 (x4) #A12120 Quick 7 Assembly Tip 4 7 6 Proper orientation of CAM LOCK 7 6 7 I 4 1 K 1 3 ameriwoodhome.
STEP 8 6 7 2 (x5) #A53600 (x6) #A22510 (x10) #A12120 7 7 H 6 2 G finished edge 2 2 E 2 2 2 ameriwoodhome.
STEP 9 UNLOCK LOCK C F B J I J ameriwoodhome.
STEP 10 Quick 1 Assembly Tip (x3) #A22570 Proper orientation of CAM LOCK A UNLOCK LOCK 1 D raw surface E ameriwoodhome.
STEP 11 Assistance of another person may be needed for alignment of the assembly. 13 (x3) #A13410 UNLOCK LOCK I A F B C 13 13 D E 13 ameriwoodhome.
STEP 12 WARNING 12 Please make sure that the Backs are attached securely. All nails must be driven into the parts straight and tightened firmly. Failure to do so could cause instability, product collapse, and/or serious injury. (x16) #A21110 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. Attached the back panel as shown nailing straight into the raw edges. Assure that the unit is square. Distance from corner to corner must be equal as shown.
STEP 13 7 14 (x2) #A54510 (x4) #A12120 7 14 7 7 7 M 14 ameriwoodhome.
STEP 14 7 (x4) #A12120 Be sure the groove in the drawer sides are centered with the grooves in the drawer front. If not, loosen screws in drawer front, adjust and retighten. DWR SIDE 7 DWR SIDE M 7 ameriwoodhome.
STEP 15 5 You will need to tap with a hammer to fasten. 5 P raw surface DWR SIDE DWR SIDE DWR BACK M DWR SIDE P 5 DWR SIDE M ameriwoodhome.
STEP 16 17c 9 8 17d (x4) (x2) #A11080 #A17000 (x1) 17 #A56770 16 (x1) #A50515 8 17d DWR SIDE DWR BACK P 8 9 9 DWR SIDE 8 M 17c 16 8 ameriwoodhome.
STEP 17 A Loosen screw A Adjust door. Tighten screw A Suelte el tornillo A Acomode la puerta. Ajuste el tornillo A Défaites le vis A Ajustez la porte. Serrez le vis A Loosen screw C Turn screw B to move door. Tighten screw C Loosen screw C Adjust door. Tighten screw C *side view Suelte el tornillo C Dé vuelta el tornillo B para mover la puerta. Ajuste el tornillo C Suelte el tornillo C Acomode la puerta. Ajuste el tornillo C *la vista lateral Défaites le vis C Le vis du tour B déplacer la porte.
STEP 18 cabinet member roller drawer runner Notice the drawer bracket holes are slotted. The drawer front can be adjusted by loosening screws, making needed adjustment and retightening screws. roller M ameriwoodhome.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 10 lbs 4.5 kg 100 lbs 34 kg 50 lbs 22.7 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 10 Después de sujetar la bisagra, separe aflojando este tornillo. Página 11 Sujete el miembro derecho del gabinete con los tornillos (8). Página 14 Sujete el miembro izquierdo del gabinete con los tornillos (8). Página 19 La asistencia de otra persona puede ser necesaria para la alineación de la Asamblea. Página 20 ¡IMPORTANTE! EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE INSTALARSE DE MANERA ADECUADA.
Español Página 28 Registre su producto para recibir lo siguiente: * Detalles de nuevas tendencias - Vistazo a lo nuevo * Encuestas - alec su voz entre su comunidad * Códigos de ofertas y descuentos exclusivos * Fácil y rápido servicio de partes de remplace Para registrar su producto, visite ameriwoodhome.
Français Avant de Commencer (page 3) -Lisez attentivement chaque étape et suivez le bon ordre -Séparez et comptez toutes vos pièces et matériaux -Donnez-vous suffisamment de place pour l'assemblage -Avoir les outils suivants: tournevis à tête plate, #2 tournevis Phillips, et Marteau -Attention: Si vous utilisez une perceuse électrique ou un tournevis électrique pour visser, veillez à ralentir et arrêter lorsque la vis est bien serrée. Le non-respect de cette consigne peut endommager la vis.
Français Page 26 Notez que les trous du support du tiroir sont fendus. Le front du tiroir peut être ajusté en desserrant les vis, en effectuant le réglage nécessaire et en resserrant les vis. Page 27 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble.
