7923414COM 24" WALL CABINET B347923414COM0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first. Call: 1-866-452-4081 (toll free) Monday-Friday 9am - 5pm CST Visit: www.systembuild.com WARNING - Unit can tip over causing severe injury or death. - Anchor unit to stud in wall (if instructed to).
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Tip Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size D C B A left panel 37366056012 top 37366056031 right panel 37366056022 bottom 37366056041 E F adjustable shelf 37366056050 G back rail 37366000070 systembuild.com 2 doors 37923414060 I H back panel K73665600 wall hanger 37366000080 This piece is paperboard construction. it is not made from wood, but is required for the assembly of your unit.
Part List 2 4 1 (x10) #A22620 cam lock 3 (x10) #A22610 cam bolt 6 5 (x3) #A13430 (x4) #A17400 1-3/4" flat head machine screw (x2) #A21500 (x2) #A13800 steel pin 2-1/4" screw 7 (x4) #A80250 shelf support 8 (x4) #A89210 rubber bumper Not Actual Size 10 9 (x2) #A50395 (x4) #A65700 hinge pull systembuild.
STEP 1 13 (x4) #A65700 Separate hinges by depressing end of hinge and removing the hinge plate from the hinge arm. Press to release hinge plate. Presione para lanzar la placa de la bisagra. Pressez pour dégager la plaque de charmière hinge arm brazo de la bisagra bras de la charniére hinge plate placa de la bisagra plaque de charnière systembuild.
STEP 2 13 2 (x10) #A22610 (x4) #A65700 2 A 13 2 B systembuild.
STEP 3 1 Quick Assembly 5 (x10) #A22620 Tip (x2) #A21500 Proper orientation of CAM LOCK 5 G 1 5 D 1 systembuild.
STEP 4 UNLOCK LOCK A D finished edge C finished edge systembuild.
STEP 5 Be sure the back panel inserts into the grooves. D A I back panel raw surface C finished edge systembuild.
STEP 6 UNLOCK LOCK B C G back panel D A systembuild.
STEP 7 7 3 (x3) #A13430 (x4) #A80250 3 3 3 C 7 B A D E systembuild.
STEP 8 14 8 4 (x4) #A89210 9 10 (x4) #A17400 (x2) #A50395 (x4) #A65700 8 8 1) Position hinges onto hinge plates. 2) Be sure the front hooks catch the hinge plates first. 3) Press hinges against hinge plates until they snap together. F x2 10 F 9 Refer back to Step 1. Re-attach the hinges. 4 F 4 4 9 4 hook systembuild.
STEP 9 6 (x2) #A13800 With the assistance of another person, locate and mark the studs in the wall that the cabinet will be mounted to. Mark the location of the studs with a pencil. Position the wall hanger (H) on the wall and mark the locations of the studs on the back rail. Drill two 3 16" diameter holes in the wall hanger (H) at the stud locations. Using a level, attach the wall hanger (H) to the wall with two screws (11) as shown.
STEP 10 To adjust the doors, remove the cover on the back of the hinge arm to expose the two adjusting screws. To adjust the doors up and down, loosen the hinge plate screws. Move the door the direction needed and retighten the screws on the hinge plates. To adjust the doors sideways, turn the large adjustment screw on the hinge arm clockwise or counter clockwise, depending on the sideway direction needed. The small adjustment screw needs to be loosen or tightened in conjunction with the larger screw.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 0 lbs. 0 kg. 30 lbs 13.6 kg 35 lbs. 15.8 kg. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303). 3.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 10 Esté seguro que el panel trasero entre en los surcos. Página 13 1) coloque las bisagras cobre placas de la bisagra. 2) esté seguro el retén delantero de los ganchos de las placas de la bisagra primero. 3) presione las bisagras contra las placas de la bisagra hasta que se encajen a presión juntas. Página 14 Con la ayuda de otra persona, localice y marque los montantes en la pared a que el armario se montará. Marque la situación de los montantes con un lápiz.
Español Página 17 Registre su producto para recibir lo siguiente: * Detalles de nuevas tendencias - Vistazo a lo nuevo * Encuestas - alec su voz entre su comunidad * Códigos de ofertas y descuentos exclusivos * Fácil y rápido servicio de partes de remplace Para registrar su producto, visite systembuild.
Français -Utiliser tous les clous fournis pour le panneau arrière et les répartir également -Le panneau arrière doit être utilisé pour vous assurer que votre appareil est robuste -N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs sur cet appareil -Ne jamais pousser, tirer, ou faire glisser votre meuble Avant de Commencer (page 3) -Lisez attentivement chaque étape et suivez le bon ordre -Séparez et comptez toutes vos pièces et matériaux -Donnez-vous suffisamment de place pour l'assembl
Français Page 15 Pour régler les portes, enlevez le couvercle à l'arrière du bras de charnière pour exposer les deux vis de réglage. Pour régler les portes de haut en bas, desserrez les vis de la plaque de charnière. Déplacez la porte de la direction nécessaire et resserrez les vis sur les plaques de charnière.
