2144341COM Fireplace Mantel B342144341COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-800-489-3351 (toll free) Monday-Friday 9am - 5pm CST Visit: www.ameriwoodhome.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Secure Your Furniture Keep your home and family safe with the wall anchor kit that is included with the product.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Tip Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
k Quic bly m Asse Tip Before You Start Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. ameriwoodhome.
Board Identification Not actual size A C B Center Top 32144341010 Center Bottom 32144341020 E F H Front Panel 32144341080 Center Top Rail 32144341070 K Center Rear Rail 32144000100 Center Bottom Rail 32144341090 Left Bottom 32144341130 G J I M Right Partition 32144341040 Left Partition 32144341030 Right Partition Rail 32144341060 Left Partition Rail 32144341050 D N Right Bottom 32144341140 ameriwoodhome.
Board Identification Not actual size R S Left Bottom Rail 32144341200 Side Rail (x2) 32144341190 Right Panel 32144341180 U T Right Bottom Rail 32144341210 Y V W Left Side Rail 32144341220 Z X Right Side Rail 32144341230 Side Rear Rail (x2) 32144000240 Side Upper Rail (x2) 32144341250 AA BB Adjustable Shelf (x4) 32144341260 DD Center Rail 32144341270 Left Support Side Rail 32144000280 Back Panel (x2) K214434100 These pieces are paperboard construction.
Board Identification Not actual size DD P Y A Z G S F H O DD Y Z C J S X V CC M K BB T ameriwoodhome.
Part List Actual Size 3 2 1 4 (x26) #A21670 (x8) #A12810 #8 x 1" screw (x26) #A22760 wood dowel 6 7 (x16) #A80250 quickloc shelf support 5 (x4) #A12700 #8 x 7/8" screw 9 10 (x15) #A12120 (x32) #A22700 7/16" screw cam lock (x48) #A21110 (x32) #A22710 nail cam bolt Not Actual Size (x1) #A53655 8c 8b 8d 8e 11 bracket 8a 13 12 (x1) 8 #A84000 (x2) #A54270 safety strap kit ameriwoodhome.
STEP 1 3 2 (x4) (x2) Quick 9 6 Assembly Tip (x2) (x2) Proper orientation of CAM LOCK 9 9 3 6 I 3 2 3 J 6 3 2 ameriwoodhome.
STEP 2 3 6 2 (x2) (x2) (x2) Quick 9 Assembly Tip (x2) Proper orientation of CAM LOCK 9 3 L 6 2 9 3 K 2 6 ameriwoodhome.
STEP 3 L UNLOCK LOCK J K ameriwoodhome.
STEP 4 LOCK UNLOCK L I J K ameriwoodhome.
STEP 5 3 Turn screw clockwise to lock parts together K I J L unfinished edge ameriwoodhome.
STEP 6 9 (x4) 9 9 B 9 9 ameriwoodhome.
STEP 7 3 2 6 Quick Assembly Tip (x3) (x2) (x4) Proper orientation of CAM LOCK 2 6 6 6 C 3 3 6 2 ameriwoodhome.
STEP 8 3 Turn screw clockwise to lock parts together E C ameriwoodhome.
STEP 9 3 2 Quick 6 Assembly Tip (x4) (x3) (x2) Proper orientation of CAM LOCK 2 6 6 6 D 3 6 3 2 ameriwoodhome.
STEP 10 3 Turn screw clockwise to lock parts together F D ameriwoodhome.
STEP 11 UNLOCK B C D ameriwoodhome.
STEP 12 8b 9 8d 8a (x4) (x1) 8b 8d 8a 9 9 9 A 9 ameriwoodhome.
STEP 13 A UNLOCK LOCK C D ameriwoodhome.
STEP 14 5 (x4) G 5 5 H finished edge unfinished surface AA 5 5 ameriwoodhome.
STEP 15 1 (x4) Place the unit on it's front. 1 1 H 1 1 C E D H ameriwoodhome.
STEP 16 3 2 (x1) 6 (x2) (x1) Quick 9 Assembly Tip Proper orientation of CAM LOCK (x3) 9 T 3 3 9 9 V 2 ameriwoodhome.
STEP 17 3 2 (x3) 9 6 (x2) Quick Assembly Tip (x3) (x1) 9 Proper orientation of CAM LOCK 6 BB 6 2 2 6 3 3 X 2 ameriwoodhome.
STEP 18 V UNLOCK LOCK X BB V T X BB ameriwoodhome.
STEP 19 3 Turn clockwise to lock parts together BB T X V M unfinished edge finished edge ameriwoodhome.
STEP 20 9 (x2) 9 9 M T V ameriwoodhome.
STEP 21 3 2 6 Quick Assembly Tip (x3) (x2) (x4) Proper orientation of CAM LOCK 2 6 6 3 6 Q 3 6 3 2 ameriwoodhome.
STEP 22 3 Turn clockwise to lock parts together S Q ameriwoodhome.
STEP 23 UNLOCK S M ameriwoodhome.
STEP 24 6 2 9 Quick Assembly Tip (x1) (x2) (x2) Proper orientation of CAM LOCK 9 9 6 O 6 2 ameriwoodhome.
STEP 25 2 7 (x2) 12 (x1) (x4) 7 7 7 12 edges flush S Y 2 2 ameriwoodhome.
STEP 26 UNLOCK O ameriwoodhome.
STEP 27 9 1 (x2) (x2) Insert two cam bolts into holes as shown. 9 C UNLOCK 9 Y O C BB 1 ameriwoodhome.
STEP 28 3 2 (x1) 6 (x1) (x2) Quick 9 Assembly Tip (x3) Proper orientation of CAM LOCK 9 3 3 U 9 6 9 W 2 ameriwoodhome.
STEP 29 3 2 6 Assembly Tip (x3) (x2) (x3) Quick 9 Proper orientation of CAM LOCK (x1) 9 6 CC 6 2 2 6 3 X 2 ameriwoodhome.
STEP 30 W UNLOCK LOCK X CC W U X CC ameriwoodhome.
STEP 31 3 Turn screw clockwise to lock parts together CC U X W N unfinished edge finished edge ameriwoodhome.
STEP 32 9 (x2) 9 N 9 U W ameriwoodhome.
STEP 33 3 Quick 6 2 Assembly Tip (x4) (x3) (x2) Proper orientation of CAM LOCK 2 6 6 6 R 6 3 3 2 ameriwoodhome.
STEP 34 3 Turn screw clockwise to lock parts together S R ameriwoodhome.
STEP 35 UNLOCK LOCK S R ameriwoodhome.
STEP 36 6 2 (x1) (x2) Quick 9 Assembly Tip (x2) Proper orientation of CAM LOCK 9 9 6 P 6 2 ameriwoodhome.
STEP 37 2 7 12 (x1) (x4) (x2) 7 7 7 7 12 edges flush R S Y 2 2 ameriwoodhome.
STEP 38 LOCK UNLOCK R ameriwoodhome.
STEP 39 9 1 (x2) (x2) Insert two cam bolts into holes as shown. 9 D 9 D UNLOCK LOCK 1 ameriwoodhome.
STEP 40 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. 10 With the help of another person, set the unit upright. Attached the back panel as shown nailing straight into the raw edges. (x48) DD raw surface DD 10 raw surface Flush bottom edge of the back panel with the bottom edge of bottom (M - Left Bottom and N - Right Bottom). ameriwoodhome.
STEP 41 7 (x6) 7 7 7 7 7 ameriwoodhome.
STEP 42 7 (x1) 11 (x1) 7 11 ameriwoodhome.
STEP 43 8c For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. 8e 8d IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. 8e WARNING Serious or fatal crushing injuries can 8d hole occur from furniture tipover.
STEP 44 4 (x16) 4 4 4 Z 4 4 Z 4 Z Z ameriwoodhome.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 10 lbs 4.5 kg 10 lbs 4.5 kg 10 lbs 4.5 kg 10 lbs 4.5 kg 10 lbs 4.5 kg 10 lbs 4.5 kg 10 lbs 4.5 kg 10 lbs 4.5 kg 10 lbs 4.5 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 13 Gire el tornillo en el sentido de las agujas del reloj para fijar las piezas. Página 35, 47 Inserte dos pernos de leva en los agujeros como se muestra. Página 48 ¡IMPORTANTE! EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y SE DEBE INSTALAR CORRECTAMENTE. Con la ayuda de otra persona, ponga la unidad en posición vertical. Fije el panel trasero como se indica clavando directamente en los bordes brutos.
Español OPCIÓN 2: Fijación en la pared de yeso Ubique su unidad en el lugar deseado contra una pared y marque la pared a través del soporte de seguridad, luego mueva su unidad a un lado. Perfore un agujero de 3/16 de pulgada de diámetro (5 mm) en la pared. Golpee el anclaje de pared en el agujero hasta que quede al ras. Mueva su unidad a su ubicación y fije el soporte de pared al anclaje de pared con el tornillo. Página 53 CARGA MAXIMA Esta unidad ha sido diseñada para soportar las cargas máximas indicadas.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.ameriwoodhome.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 13 Tournez la vis dans le sens des aiguilles d'une montre pour fixer les pièces ensemble. Page 35, 47 Insérez deux boulons de came dans les trous comme indiqué. Page 48 IMPORTANT! LE PANNEAU ARRIÈRE EST UNE PARTIE INTÉGRANTE DE L'UNITÉ ET DOIT ÊTRE INSTALLÉ DE MANIÈRE ADÉQUATE. Avec l'aide d'une autre personne, mettez l'unité en position verticale. Fixez le panneau arrière comme indiqué en le clouant directement dans les bords bruts.
Français OPTION 2 : Fixation dans les cloisons sèches Placez votre appareil à l'endroit souhaité contre un mur et marquez le mur à travers le support de sécurité, puis mettez votre appareil de côté. Percez un trou de 3/16 de pouce de diamètre (5 mm) dans le panneau mural. Tapez sur l'ancrage mural dans le trou jusqu'à ce qu'il soit affleurant. Mettez votre appareil en place et fixez le support mural à l'ancrage mural à l'aide de la vis.
